mod. 03.04.01 FMA

Hydraulic semi-automatic drilling machine with six drills. Independent setting of the spindles. The machine works one pair of last.

mod. 03.04.02 AST/1

mod. 03.04.03 AST/2

Unit to use with a band saw with blade of 5/16'' - 1/2 of width to make the cut in the articulated lasts type "Tendo" with two different radius so that obtain a little detent for the best catch of the two parts of the last (AST/2). Special adjutments permit to vary the radius of curvature between 80 and 120 mm. max.The blockage of the last is made in the pins-holes for the spring.The unit, by request, is supplied with upper and lower saw blade guides mod. 03.03.10 AGL/S and 03.03.11 AGL/I

mod. 03.04.05 CCT

Chain slotting machine with automatic work cycle to make the hinge slots. The machine is provided with a rotating table on which the lasts to be worked are fixed. This system enables a continuos cycle: while two lasts are under working the operator can place a new pair of lasts to be worked. Graduated scales allow an easy working heads and lasts adjustment. The machine is equipped with chains 6 x 50 mm. Output 120/150 pairs/hour.

mod. 03.04.09 APP/3M

Hydraulic machine to drive the three hinge pins into the last at the same time.
Pin ø 7 mm. Output 80/100 pairs/hour. Equipped with machine vice for hinge testing.